Constellation Sconce: Installation and Room Placement Tips

Quick answer

Install the Constellation Sconce at eye level (60–66 inches from floor) in hallways and living rooms, or 18–24 inches above a nightstand in bedrooms. Use a voltage tester and follow local codes for the hardwired LED connection.

Step-by-step installation guide

1. Turn off power and test the circuit: Switch off the breaker controlling the wall box. Use a non-contact voltage tester on the wires to confirm no current is present. Common mistake: assuming the wall switch is enough—always test at the box. Never skip the voltage test even if the switch is off.
2. Mount the crossbar and connect wires: Attach the provided crossbar to the wall box with the screws included. Connect the sconce's neutral wire (white) to the house neutral, and the hot wire (black) to the house hot. Secure with wire nuts and wrap with electrical tape. Common mistake: reversing polarity can cause flickering—double-check color matching. Mark wires with tape if colors are faded.
3. Secure the sconce base and install the bulb: Align the sconce base over the crossbar and tighten the mounting screws. Insert the 12V G9 LED bulb into the socket—avoid touching the glass with bare fingers (use a cloth or gloves). Common mistake: overtightening can crack the wood or glass; snug is enough. Use a soft cloth to handle the bulb and glass orb.
4. Attach the glass orb and adjust the sphere: Carefully screw the hand-blown glass orb onto the socket ring. The metal sphere should hang freely below. Rotate it gently to align with your preferred angle. Common mistake: forcing the glass can chip the rim—if it doesn't thread easily, check alignment. The sphere and orb should not touch the wall.
5. Restore power and test: Turn the breaker back on. Flip the wall switch and check that the light illuminates evenly. If it flickers or stays dark, turn off power and re-check wire connections. Common mistake: a loose wire nut is the most frequent cause of failure. If the light doesn't work, the issue is almost always a connection, not the bulb.
6. Position for best visual effect: For hallways: 60–66 inches from floor, centered on the wall. For living rooms: 60–66 inches, spaced 6–8 feet apart for a balanced constellation look. For bedrooms: 18–24 inches above the nightstand, centered over it. Common mistake: placing the sconce too close to a corner makes the shadow fall awkwardly. Step back and view from multiple angles before finalizing.

Product facts

• Constellation Sconce: The Constellation sconce uses solid Walnut or White Oak with a Hardwax Oil finish and hand-blown glass. The natural wood and glass require gentle handling during installation—avoid scratching the finish with tools and support the glass orb when connecting wires.