블로그로 돌아가기
사용 방법 가이드 2026-11-20 hollis+morris 0 조회수

How to Hang a Hexagon Chandelier Correctly

How to Hang a Hexagon Chandelier Correctly

Learn the correct way to hang a hexagon chandelier, including height, placement, and electrical prep tips based on the product's specs.

Start with the Right Prep

Hanging a hexagon chandelier correctly starts before you lift the fixture. The hollis+morris Hexagon Chandelier is a substantial piece—its solid wood frame and downward-facing LED array mean you need a ceiling box rated for the weight and a circuit that can supply 120VAC to the included 24V driver. The driver is phase-dimmable out of the box (0-10V dimmable driver available on request), so plan your dimmer switch accordingly. If you are not comfortable with mains wiring, hire a qualified electrician; the manufacturer requires one for the final connection.

Hexagon Chandelier Key Specs

  • Hexagon Chandelier: 24V Phase Dimmable Driver (0-10V Dimmable Driver Upon Request) Confirms the chandelier uses low-voltage LED and is dimmable, but the dimmer must be compatible with 24V phase dimming or the optional 0-10V driver.
    Hexagon Chandelier
    Hexagon Chandelier
  • Hexagon Chandelier: 10' Power Cord Length and Suspension Cables (Custom Lengths Available Upon Request) The standard drop gives you a baseline for hanging height; custom lengths let you adjust for ceiling height or room proportions.
  • Hexagon Chandelier: 120VAC - 24VDC (120 - 277VAC - 24VDC Upon Request) Standard US household voltage works, but if your building uses a different voltage, request the alternate driver before ordering.

Step-by-Step Hanging Guide

These steps assume the ceiling electrical box is already in place and the circuit is off. Do not attempt mains wiring unless you are licensed.

  1. 1. Choose the hanging height: Measure from the ceiling to the desired bottom of the chandelier. A common rule for dining tables is a certain distance above the tabletop. For a hallway or entry, allow enough clearance below. The standard cord gives you room to adjust; custom lengths are available if your ceiling is higher or lower.
  2. 2. Mount the ceiling canopy: The chandelier uses a single canopy connection. Secure the canopy to the ceiling box with the provided hardware. The standard canopy is powder-coated ceiling white; custom finishes are available on request.
  3. 3. Connect the driver: The 24V driver sits inside the canopy. Connect the incoming mains (120VAC) to the driver input, then connect the low-voltage output to the chandelier's LED array. If you ordered the 0-10V driver, also connect the low-voltage dimming wires per the driver's instructions.
  4. 4. Hang the chandelier: Attach the suspension cables to the canopy and the chandelier's top plate. Use the supplied cables; do not substitute hardware. Adjust the cables so the chandelier hangs level. The solid wood frame (Walnut or White Oak with Hardwax Oil Finish) is heavy—have a helper support it during attachment.
  5. 5. Test before finalizing: Restore power and test the dimmer. The 3000K LED should light evenly and dim smoothly. If you have the standard driver, use a 24V phase dimmer. If you have the 0-10V driver, use a 0-10V dimmer. Turn off power before making any adjustments.

Placement and Clearance Tips

The Hexagon Chandelier's downward-facing light direction creates a focused pool of warm 3000K light. In a dining room, center it over the table. In a foyer or stairwell, make sure the chandelier's lowest point is at a safe height above the floor. The one-point suspension means the ceiling box must be centered exactly where you want the chandelier. If you are unsure about the location, use a temporary hook and string to simulate the drop before drilling.

What to Confirm Before You Order

The chandelier is made to order and ships in 5–6 weeks. Choose your size (Small or Large) and wood finish (Walnut or White Oak in Natural, White, or Black). The Hardwax Oil Finish is durable but not waterproof—avoid hanging it in a damp location unless you confirm with the manufacturer. The standard driver works with 120VAC; if your home uses 277VAC, request the alternate driver. Custom canopy colors and cable lengths are available upon request, so measure twice and order once.

관련 게시글

Customer Service
홈
상품
장바구니
내 정보